Like everything else in your life, you need to maintain your plumbing drains. It’s recommended that you are constantly checking drains for clogs, back ups, broken pipes, anything that could lead to a back up in your pipes. We recommend if you have plumbing work done such as rodding your clean out, have it rodded yearly around the same time each year to prevent back ups from occurring. It’s always best to prevent a back-up than having a back-up and it turns into an emergency.

Although we suggest calling us back out again to take care of your potential stressful situation, there are a few different ways you can maintain your plumbing at home by yourself.

1. Watch What You Flush

Realistically, nothing is supposed to go down your toilet drain other than toilet paper and your own waste. You should never flush things down your drain that aren’t meant to be put down there. Over time, flushing things down your drain is going to cause build up and eventually lead to a clogged sewer line which is a stressful situation. Things like feminine hygiene products, Q-tips, plastic, wrappers, “flushable” wipes, baby wipes, food/grease, can all cause a back up and eventually they will cause one, whether it’s sooner or later, it’s not going to be good. Avoid having to call a plumber to rod your toilet by refraining from dumping things in the toilet and instead putting a trash can in the bathroom for all garbage you might have.

2. You Can Check With Food Coloring

If you’re worried your toilet is leaking, you can try to test it out with food coloring. Take red or blue food coloring and put it in the tank of the toilet. If it leaks into the bowl after about an hour, you know you have a leak. If after an hour it didn’t leak into the toilet you’re all set. The food color leaking suggests you replace the tank ball to prevent it from leaking. Changing out this tank ball can also save you money by lowering your water bill. A leaking toilet is definitely going to rack up your water bill, and you don’t always hear it running.

3. Clean Your Shower heads

All plumbing fixtures can be clogged with mineral deposits, your shower head included. These mineral deposits can cause your shower head to be so clogged it doesn’t work, or it won’t be as effective as it should be. To clean your shower heads, you should unscrew them and soak them in vinegar for 24 hours. Make sure the whole shower head is soaked in the vinegar to get the deposit off. Once the time is up you should be good to go to screw it back on, however, if the mineral buildup is too thick or the shower head isn’t in the best condition and it’s effectiveness isn’t as good as it used to be, you should consider getting a new shower head.

4. Mesh Covers

There are so many different types of covers out there to purchase that can protect your drains from getting clogged. You can find these almost anywhere in stores such as Target, Wal-Mart, Lowe’s, Menard’s, even online on Amazon. These mesh drain covers protect your drains from hair and soap, the number one thing that leaks to a clogged drain. Using these mesh drain covers allows the things that are too big to get stuck in the mesh which then after every use you can throw away and save your pipes from a blockage and needed to be snaked.

5. Make it a Habit to Inspect Your Plumbing

Like it was mentioned before, your pipes need maintenance. Although they’re not high maintenance usually, you should always be on the look out for any potential problems and address and fix the problem correctly before it escalates. Repairing plumbing before it turns into an emergency is going to cost you less money in the long run and you’ll be glad you fixed it sooner rather than later. If you notice any type of rust or corroded pipes, you should immediately call a plumber to discuss what options you have. Don’t forget, we’re always here for you! Give us a call if you need any plumbing work done. 708-845-7922.